Description
Description
A breathable, ecological quartz sand-based base coat obtained
through an attentive blend of non-toxic and highly biodegradable
chemical additives, selected quartz rocks and first class silica sands, all
bound together with acrylic in-emulsion resins
Characteristics
Product with a very low content of volatile organic solvents (VOC).
Excellent cohesion and elasticity, good breathability, good resistance
to weathering. ISOQUARZ thus exerts a function of reinforcement of
the surface and doesn’t give rise to instances of detachment from the
wall. It allows in this way an optimal anchorage, resulting in a long
lasting final result. Solid content : 57 %
Composition
Quartz sand, silica sand, white titanium oxide, acrylic in-emulsion
resins, water, cellulose, natural preservatives, vegetable anti-foaming
agents.
Support surfaces
ISOQUARZ, thanks to its characteristics, is applied to every kind of
surface and is also excellent in supporting further layers : paintings,
plasters, marmorino stuccos, intonachinos and microcement, lime
painting, also suitable for old buildings. Particularly recommended for
plasters and drywalls. When ISOQUARZ is dry, his slightly rugged
aspect (like thin sandpaper) facilitates the anchorage of successive
finishing coats.
Preparation of surfaces
When applied to new surfaces no pre-treatment is necessary. On
already tinted and/or degraded surfaces the existing layer, owing to
the problems of cohesion with the surface, must be
removed and any cracks must be filled with putty. The background
must be clean, dry, not friable, without salts or humidity, oil traces or
greasy substances. Leave the new plaster to dry for at least 28
days. A preliminary test after this phase is recommended.
Application
Stir well before use.
Do not lay on upon a frozen, humid or eccessively hot surface, nor
during a day with strong wind or heat. Utilisation temperature : from
+5 °C to +30 °C. On the basis of the desired result, it can be used
alone or diluted with maximum : 1 part of ISOQUARZ per 1 part of
water. After applying ISOQUARZ, wait 24 hours before applying the
first layer of paint or
of finishing intonachino. Wash the tools with
water after use.
Warning
Protect doors, windows, structures and in general all parts which do
not need to be painted. Any stain or spray must be immediately
removed with water
Yield
ISOQUARZ has a yield ranging from 8 to 14 m²/ lt according to
absorption, diluition and type of surface.
How to apply the paint
ISOQUARZ can be laid with a brush, a roller or by spraying.
Containers and storage
5 lt or 15 lt plastic buckets
Specific weight : kg 1,550 g x lt ISOQUARZ must be stored inside
original well-sealed containers and remains stable for at least 12
months, provided that it is kept in places with a temperature not
below +5°C and not above +30°C.
Safety norms
Ventilate during laying.
Avoid contact with skin and eyes, in case of contact wash immediately
and abundantly with water. Keep out of the reach of children. Please
refer to the safety data sheet for information regarding toxins.
Disposal
Dispose of the product according to the local regulations. Empty
containers must be recycled.
Volatile Organic Compounds VOC
EU limit value for this VOC product 30g/l
Category A/h liquid phase :
This product contains max 0,02 g/l VOC. In accordance with the
standard ISO 11890-2:2006. Reference to the decision of the
Commission of the European Communities 2009/544/CE
