Description
Description
BETOSTUC MONOTECH is the result of
in-depth research and has been subject to
numerous tests with innovative raw materials
in order to facilitate its preparation and
application.
BETOSTUC MONOTECH Is a decorative
plaster finish for internal floor surfaces and
walls (both internal and external).
It permits a smooth finish with characteristics
of good resistance.
Perfectly stable over time, it maintains
the permeability of the surface with natural
protection against mould and bacteria.
Characteristics
BETOSTUC MONOTECH conforms to
UNI EN 13813 norms.
The product has notable advantages :
- For preparation you simply add water.
- Easy mixing without forming lumps.
- Smooth, facilitating application.
- It can be used for long periods after
mixing without drying.
- Excellent resistance to abrasion and
good elasticity.
- Good water resistance offering
excellent permeability to water vapour.
- Respects the environment, certificate A+.
Composition
White cement,
,
Slaked lime, calcium carbonate,
quartz powder, white titanium oxide,
dispersible powder resins, methyl cellulose,
fibre additives, binding agents.
Surfaces
BETOSTUC MONOTECH should be applied
to dry, non flakey surfaces exempt from salts
and humidity.
See table below.
Preparation of floor surfaces
After applying Isoquarz (IS/0255)
if flooring is involved, it is recommended to
apply and soak a fibre-glass mesh
of 145 g/mq 4×4,5 mm (LM/1180),
Wait for it to dry and apply a coat of
B etostu c Monotech Fondo
CC/0012 (see product data sheet)
Level-off imperfections on horizontal and/or
vertical surfaces, underlays, concrete,
cellular concrete, bricks, cement blocks,
tiles etc.
Betostuc Monotech Fondo gives the
surface a stronger resistance, facilitating
application. Perfectly stable over time,
It maintains the permeability of the surface.
Wait for the surface to dry completely,
without any residue of humidity and apply
the first coat of Betostuc Monotech Fondo.
Colours
BETOSTUC MONOTECH is white. Starting
with the base colour, by adding earth
pigments, oxides or appropriate colouring
pastes, you can obtain various tonalities.
Preparation of the mix
BETOSTUC MONOTECH (bags of 20 Kg)
+ circa 30 % water, (circa 5 to 6 litres).
Mix the water with the desired pigment
(filter the mix, if necessary). Carefully add
a bag of 20kg BETOSTUC MONOTECH
continuing to stir until the product is completely
mixed. After obtaining a fluid mix, allow the mix
to settle for some minutes and then stir again
before application.
Application
The temperature should be in the range of
a minimum of +5 °C and a maximum of
+30 °C.
First coat
Consumption : circa 1.200 – 1.500 g/m²
Apply evenly.
(After 24 hours) Second coat
Consumption : circa 600 – 750 g/m²
Apply the second coat when the first coat is
dry, making sure that it is applied evenly in
such a way that the surface is uniform.
Third coat and polishing
Consumption : circa 200 – 250 g/m²
Proceed with the third coat whilst the second
coat is not completely dry, so that the
pressure of the stainless steel spatula
Allows penetration of the inert minerals
in the already applied base.
In the drying phase, proceed with polishing
with the steel spatula in order to obtain
a smooth effect The day after applying the
product, if necessary, sand with sand paper
(from 80 to 150) to obtain an even smoother
finish.
Storage
The product can be stored in bags for a
period of 12 months without any alteration
to its qualities, providing storage is in a dry
place and in the original packing.
Health and safety regulations
Ventilate during application. Avoid contact
with the skin and eyes, in case of contact
wash immediately and abundantly with water.
Keep out of the reach of children.
For further information please see the safety
sheet.
Disposal
Dispose of the product according to local
regulations. Empty containers must be
reycled.
Optional protective finishing coats
Nippolin Poly B bicomponent in water
phase (matt finish PL/1245 or gloss –
PL/1244)
Consumtion : circa 8 -10 m²/ lt. Allow surfaces
to dry for circa 3 days, then proceed to apply
with brush or roller in two stages.
Do not apply at temperatures below + 15 °
or above + 40°C.
Consult the technical data sheet of the product.
or Easy-Floor (matt/satin finish
PL/1240 or gloss PL/1241), water based
with low VOC. Consumption approx
7 – 8 m²/ lt. Allow the surface to dry for approx
3 days, then proceed to apply with a brush or
roller in two stages. Do not apply with temperature
below + 15°C or above + 40°C.
It’s possible to finish with one or two coats of
Beeswax and Carnauba wax (CE/0300).
See technical data sheet of the product.
Beeswax and Carnauba wax (gloss finish)
Consumtion : circa 10 – 14 m²/lt.
Allow the surface to dry for at least 3 days, then
proceed to apply the wax with a steel spatula
and apply uniformly. Before completely dry,
Polish with cotton cloth. Consult data sheet.
